LEADSEN INDUSTRIAL
 
     
 
HOME ABOUT KNOWLEDGE PRODUCT SOLUTION CONTACT
 
Leadsen漏水检测
Home>>Product>LS-6101
 

Overview The water leak detection unit can be connected to an inductive probe. Upon detection of a water leak, the unit alarm indicator turns from green to red, producing a voltage-free dry contact signal and returning the signal to a central monitoring system or intelligent building system.

Unit use
Normal state: green work light is on.
Leakage occurs: put a wet sponge on the sensing probe, then the light leak from green to red, dry contact is activated.
Return to normal: Remove the wet sponge from the sensing probe. At this time, the light leakage indicator turns from red to green, and the dry contact will be recovered.

Precautions
Please carefully read the specific manual of the building management system before wiring.
During installation, make sure that the probe can not contact the conductor, otherwise it may cause false positives.

Design Features
Anti-interference: ability
Easy to install: modular, pluggable terminals
Local Alarm: Light alarm
Sensitivity: Adjustable
Power supply: 12VDC
Output signal: dry contact
Sensing Probe: Thin-sheet sensing electrode
Size: Width 68 * Height 100 * Depth 50mm (excluding PG connector)

 

动环监控,动力监控,动环方案,动环软件,机房动力环境监控系统,环控软件,环控方案,环控品牌,机房环境监控系统,,机房监控方案,房监控品牌,机房监控软件,机房监控系统,机房报警系统,温湿度监控,UPS监控,空调监控,数据中心监控,仓库监控,isp-cms,sensaphone,akcp,mimim panel,picobox,ttk,leadsen,tracetek,raychem
Home
About
Knowledge
Prodruct

Solution
Contact
 

Contact
Add: 113 Barksdale Professional Center, Newark, DE 19711
Mail: sales@leadsen.top
Web: www.leadsen.top
Copyright © 2018 LEADSEN INDUSTRIAL LTD. All rights reserved.
Website Design & Web Development by AY Media